The NEO Smart offers the best in power and intelligence and is the quietest indoor trainer currently available on the market. The lack of any physical transmissions means this is the first true direct drive. Road feel is simulated in a highly realistic manner, there is no loss of power. The powerful motor is able to apply resistance up to 2200 Watt and simulate slopes realistically up to 25%. It also speeds up during descents. This ensures the most realistic cycling experience, also during climbs. The lack of any physical transmission, and in turn any parts that could rattle or rub against each other, ensures this trainer is extremely quiet. In addition, this trainer requires no calibration and suffers no wear and tear. Just like other Smart trainers, the NEO communicates using ANT+ and Bluetooth Smart, allowing it to be connected quickly and easily with Tacx apps. Performance data can be viewed on several devices simultaneously, including your smartphone, bike computer and sports watch. When the NEO Smart isn’t connected to a smartphone, tablet or computer, it behaves as a fluid trainer. This means the trainer behaves progressively: when your speed increases, the resistance increases as well. So it is possible to use this trainer in a “stand-alone” status. Furthermore, the Tacx NEO features Plug in/Plug out technology and can therefore be used with and without a plug. When the plug is not in use, the trainer will act as a wireless motor brake. This means the trainer will be not be able to speed up during descents. So you can use this trainer anytime and anywhere, even when you don’t have your smartphone with you. -Software Tacx apps & Third party apps. PC software via upgrade. -Operation Automatic -Resistance unit Direct drive -Realistic slope 25% 1 -Descent simulation To -5% -Max brake power (10 sec.) 2200 Watt -Mass inertia 125 kg 2
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer. Three different thread pitches ensure a perfect fit for whichever axle you're using.
CycleOps' Sweat Guard is a valuable accessory for any trainer. It keeps corrosive sweat from harming your bike and home. It's made from soft, absorbent, washable terry cloth and is attached with elastic and Velcro straps. Two front pockets keep the remote, phone, or food close by while you're hammering away.
The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes
Wahoo's ANT+ Key transforms your iPhone into an all-in-one training partner for running, riding, and going to the gym. Wirelessly connects your iPhone to fitness sensors and allows you to collect and track all your fitness data like heart rate, speed, and cadence through your favorite fitness apps. • Connects your iPhone to ANT+ fitness sensors: heart rate, cycling speed/cadence, and power meters (each sold separately) • Low-energy and does not require charging • Weight: 3.5 grams
TICKR FIT heart rate armband uses optical heart rate technology to provide accurate heart rate and calorie burn data in the most comfortable form factor yet! Equipped with Bluetooth and ANT+ technology to seamlessly pair with fitness apps, smartphones, and GPS bike computers and watches. Worn on the forearm, the TICKR FIT heart rate monitor comes with an adjustable band that is designed for your most grueling workouts including running, cycling, fitness classes, and more. TICKR FIT has water-resistant technology and a rechargeable battery that lasts up to 30 hours. - Dual band technology - Real time heart rate and calorie tracking - Advanced performance material - USB rechargeable battery - LED indicator lights - Two adjustable bands included - Third party app compatibility - Apple watch and apple TV integration
This freehub body enables you to fit a Campagnolo cassette on the NEO Smart and the FLUX Smart. Suitable for 9 through 11 speed Campagnolo cassettes. How to place the Campagnolo Body: 1. Remove the cap with a 5-millimeter Allen key. 2. Replace the Shimano/SRAM body with the Campagnolo body. 3. Place the cap on the Campagnolo body and tighten with a 5-millimeter Allen key.
$44.99 - $59.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
Don't miss out on any action! The Tacx GoPro bike mount can be placed on the handlebar or saddle to record everything that happens in front or behind you. Installing the bracket on your bike is very simple. After placing the mount on your bike, you can insert the camera into the holder easily and quickly and you are ready to record. - Easily switch between mounting options - Handlebar adapter can be used on road or mountain bikes - Saddle adapter works with 7mm and 9mm diameter saddle rails and is also compatible with the Tacx Mudguard - Compatible with GoPro HERO and HERO +, GoPro HERO 2, GoPro HERO 3 and 3+ and GoPro HERO 4 and 4+ models - Also suitable for any other camera with a base identical to that of GoPro cameras
The NEO Track replaces the front wheel support of the NEO and enables you to steer freely in the Tacx Trainer software 4, Advanced (Windows PC). The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to decide yourself where to go to when training in virtual worlds. The NEO Track is only suitable for the NEO Smart in combination with the Upgrade Smart (Tacx Trainer software 4, Advanced and ANT+ antenna required). - Communicates wirelessly with the computer via ANT+ - Rubber caps on the bottom prevent sliding and reduce noise - Foldable, lightweight and easy to store
The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.
Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.
- Remote control for CycleOps VirtualTraining to allow the rider to change the ride view, mark intervals, pause and virtually change gears when using with 400 series or Phantom 5 Indoor Cycle. - Compatible with tablet and mobile devices via Bluetooth Smart only (iPad 3 or newer, iPhone 4s or newer.) - Compatible with PC via ANT+ or Bluetooth Smart (Bluetooth Smart connection Windows 8 or ANT+ connection requires ANT+ dongle/antenna.)
Keep corrosive sweat from reaching your frame while you're generating heat on your trainer. - Cell phone pouch included
The TICKR X is the ultimate heart rate monitor, capturing both motion and intensity to give you the most effective workout. It tracks heart rate, calorie burn, rep counting with Wahoo's RunFit or 7 Minute Workout apps and PEAR+ Sports, running analytics and more! It even has built-in memory for heart rate and calorie data, giving you the freedom to train without a phone. Equipped with Bluetooth and ANT+ dual-band technology, it connects to most smartphones, GPS watches and bike computers. TICKR X is compatible with most popular fitness apps, making it an incredibly versatile workout tracker for all of your activities. No other heart rate training platform can compete with the TICKR X. Period.
Whether you want to attend a group ride in Zwift, climb the Dolomites in Rouvy, or simply need a sweat session, the M2 smart trainer can get you there. All you need is your bike, the M2, your favorite virtual training software, and device of choice. This do-it-all, smart bike trainer is capable of replicating any workout thrown its way, up to 1500 watts and a 15% climbing grade. Simply connect to your virtual training application of choice via integrated dual-band ANT+ FE-C and Bluetooth, and let the M2’s electromagnetic response system do the rest. And, thanks to integrated speed, cadence, and power data, you can track and record performance data without extra external sensors. Plus, our innovative clutch knob ensures perfect tire-to roller connection for every single ride. - Noise level is a quiet 69 decibels at 20 mph. - PowerTuned using PowerTap technology for accurate power readings up to +/- 5%. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm, and 135mm. - Optional thru-axle adapter available for 142x12mm and 148x12mm. - Integrated dual ANT+ FE-C and Bluetooth standards. - Fast response electromagnetic resistance ensures most responsive resistance and maximum power available. - Robust design is capable of handling up to 1500 watts at 20 mph and can simulate up to a 15% climbing grade. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2. - Internally integrated speed, cadence, and power data eliminates the need for extra external sensors. - LED indicator lights communicate connectivity and more. - Internal cooling system moves air through the trainer to keep it cool while active thermal sensors ensure accurate performance data even during the hardest of workouts. - Comes on the Saris foldable Classic frame with spring loaded, bolt-action lever. - Features clutch knob for perfect roller to tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27", and 29" - up to a 2.0-inch tire. - Does not fit 650c wheel sizes, nor all 29er tires. - Precision-machined alloy roller reduces tire wear and slippage. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Trainer tire recommended - Compatible with a wide variety of devices and virtual training applications, including Rouvy, Zwift, TrainerRoad, and many more. Contact us with questions about compatibility with other software. - Over the air (OTA) firmware updates via Bluetooth devices ensures the M2 is up to date. - Some assembly required - All of our trainers are tested to the combined weight (rider and bike) of 300 lbs. - ANT+ and BlueGiga USB dongles sold separately - Not compatible with CycleOps- or Saris-branded 20/24" wheel adapter
Kinetic's Riser Ring lets you level your bike when you're riding on your trainer. Plus, there are 3 other steps that let you simulate climbing by elevating the front wheel. The Riser Ring is simple to use and stable for excellent support. - Designed for the following Kinetic trainers: the Road Machine, Magnetic, and Cyclone
Kurt Kinetic’s Road Machine 2.0 Fluid Trainer features a fluid-based unit for smooth, progressive resistance that matches your effort for a true outdoor simulation. With a 6.25 lb. flywheel and a sealed fluid chamber pushing back, you get a natural resistance feel and a lower operating temperature for consistency to 3000 watts and beyond. When it's time to store or transport the unit, simply fold up the legs and tuck it away. And, thanks to the 2 1/8-inch roller, tire wear is reduced significantly.
Turn your basement into a hellish winter sweat cavern as you dream of summer climbs and fitting back into your spandex. With a little help from the Kurt Kinetic Road Machine | Smart Trainer, you'll be creating puddles beneath your stallion and engaging in endless suffering of your own free will. With on-board power training, the Road Machine Smart App links up with Siri (or the faceless automaton Android AI) to make sure you ain't kidding yourself with those intervals you're "throwing down." When you're screaming, "There's no more?!" at your television after binge-riding through all four seasons of Battlestar Galactica, the Road Machine | Smart Trainer will even hold your interest with tailored workouts. So, let's not hear anymore of that "It's too cold to ride" business. The Road Machine | Smart Trainer will have none of it! - Stable, durable trainer frame - Unconditional lifetime warrantly - Frame fits 22-inch to 29-inch wheels - Large diameter roller - Pairs with devices using Bluetooth Smart - Ergonomic rubberized knobs and feet - Progressive fluid resistance - Fully assembled - Folds flat for easy storage
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
Kinetic's Trainer Mat is a simple necessity for any cyclist who cherishes a clean training environment. It keeps floors clean and sweat-free and reduces vibration. Durable closed-cell PVC foam means it will stand up to even the most intense training sessions.
CycleOps' Climbing Riser Block offers 3 levels of elevation to lift your front wheel and provide a workout simulating climbing hills. For steeper climbing workouts, 2 climbing blocks (sold separately) may be placed on top of each other for many different adjustment levels.
CycleOps' Mag+ Trainer with Adjuster uses magnetic fields to generate a wide range of adjustable resistance, great for cyclists determined to stay in shape year round. Its unique design incorporates a flywheel for a smooth, quiet ride. Choose from 5 resistance settings for varied workouts. Plus, the bar-mounted remote shifter means you never break your cadence.
CycleOps' Magneto is an innovative training tool to keep you fit, trim, and ready to ride no matter what the weather is like outside. It offers progressive resistance, which means the faster you go, the quicker the resistance ramps up, just like the real world. There is no adjustment necessary, and the resistance level automatically changes to give you a smooth, quiet ride. Plus, the frame is tough, sturdy and stable so you can ride as hard as you want.
Page 1 of 1